Site Information

 Loading... Please wait...
  • Image 1

Conductor’s Special 228V Train Horn Kit


Product Description

Conductor’s Special 228V Train Horn Kit

Short on space? We have your solution! This horn kit features a compact Viair 145 PSI Air Source Kit that takes up just over half a cubic foot of space and our tried and tested Black Finish Four Horn Kit with independently mountable trumpets! The horns can be mounted any-which-way, from inside of bumpers to engine bays, or even both at once; you have the most flexibility of any full size horn kit available. This horn kit is simply the most compact and flexible train horn kit on the market!

Ideal Start Kit For DIY and Hobbyists!

This kit has a basic air system setup and requires the least labor of any of our full size train horn kits. If you’re a hobbyist and want to take on the air horn challenge with little or no experience this is the kit for you. After its installed you can hear the sound of your work at the push of a button!


  • Lightweight & Extremely Loud
  • Rust-proof Stainless Steel Diaphragms
  • Compact Design For Even The Tightest Spots
  • All Standard Mounting Hardware

Kit Includes

  • Shocker S4 Train Horns
  • Viair 2.0 Gallon (8.8 Liter) Air Tank
  • Viair 280C Compressor
  • Viair 110145 PSI Pressure Switch
  • 175 PSI Safety Valve
  • Drain Cock
  • 10 ft of 516 in D.O.T. Approved Airline
  • 17 ft of ½ in D.O.T. Approved Airline
  • 20 ft of Frost-proof 12 Gauge Hookup Wire
  • ½ in NPT Electric Solenoid Valve
  • Brass NPT Fittings Kit
  • Wiring & Plumbing Kit
  • Mounting Hardware
  • Detailed Instructions

Product Notes

The air source unit provided in this horn kit must be mounted upright in a dry location. If you are uncertain if you have such a place available, please feel free to contact our sales team ( or give us a call at +1-813-783-8058


Use this product in a safe and responsible manner, at a distance of at aleast 100 feet from others.

Proper Hearing protection must be worn when using this airhorn. Hearing loss or permanent damage may result from unsafe use.

Never operate this product in a closed environment or close to pedestrians or others.

It is the consumer's responsibility to comply with local noise ordinances and D.O.T. sound level laws.



Part Number
HornBlasters Shocker XL
High-Impact ABS
№ 1 19.5″, № 2 16.25″, № 3 14.75″, № 4 12.75″
№ 1 495.3 mm, № 2 412.75 mm, № 3 374.65 mm, № 4 323.85 mm
5″ (127 mm)
4.5 lb (2.04 Kg)
Fitting Size
⅛″ M NPT
Air Source Kit
Viair 20005
Operating Pressure
145 PSI
Average Fill time
1 Min 15 Sec
19.0″ (482.6 mm)
6.0″ (152.4 mm)
13.75″ (349.25 mm)
Net Weight
17.15 lb (7.78 Kg)
Air Source Kit Tank
Viair 2.0 Gallon 5 Port Tank
2.0 gal (8.8 L)
19″ (482.6 mm)
6″ (152.4 mm)
7.4″ (187.96 mm)
10.5 lb (4.76 Kg)
Air Source Kit Compressor
Viair 280 Air Compressor
12 volts DC
Max Amperage
16 amps
Maximum Duty Cycle
30% @ 100 PSI
Maximum Working Pressure
150 PSI
7.8″ (198.12 mm)
3.95″ (100.33 mm)
6.35″ (161.29 mm)
6.6 lb (2.99 Kg)


Product Videos

Locomotive Horn Switch Panel Testing 00:41

Here's a short test showing how the train horn switch panel in my old daily beater worked... I wanted my main trigger switch to be the horn button on the wheel rather than a remote button in the case of a panic situation, but still wanted the ability to go back to the stock horn if needed... Each red toggle switch arms a relay for either the stock horn, Hornblasters HB4H horns or Nathan Airchime K3HA horns...

  • Locomotive Hor...
    Here's a short test showing how the train horn switch panel in...
  • Hornblasters R...
    More information as well as the full review go too, www.djdl...

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Conductor’s Special 228V Train Horn Kit to your wish list.